Find the allowable tensile force that the multiple bolted structural joint shown in figure (a) and (b) below can transmit. Also find the efficiency…

Published by admin at August 6, 2023

Tags

Find the allowable tensile force that the multiple bolted structural joint shown in figure (a) and (b) below can transmit. Also find the efficiency of the joint.

The plates are 250 mm wide and 20 mm (main plate) and 12 mm (cover plates) thick.

The bolts are 19 mm in diameter.

The allowable stresses are 140 MPa in tension, 70 MPa in shear and 340 MPa in bearing.

Find the allowable tensile force that the multiple bolted structural joint shown in figure (a) and (b) below can transmit. Also find the efficiency…

"Get 15% discount on your first 3 orders with us" Use the following coupon FIRST15

Related posts

a running track measures 1056 ft per lap. to run 15.0 km how many laps should you run? How do you break the equation down into a solution map?

A local magic shop has a monopoly on the production of magic wands. Each customer wants only one magic wand, and the table below shows each…

A machine produces pipes used in airplanes. The average length of the pipe is 16 inches. The acceptable variance for the length is .3 inches. A…

"Get 15% discount on your first 3 orders with us"
Use the following coupon
FIRST15